Torque Reduction Wiring

Wiring

This node allows an output to be configured as the torque reduction output.

Typically a DPO (Digital Pulsed Output) would be used for the Torque Reduction Output

• Related Articles

• Torque Reduction Time

  Flat Shift Torque Reduction Time This table set the amount of time (in ms) that flat shift will make a full Torque Reduction. Up to 3D tuning is available. If in Timed Mode: The total amount of time to use full Torque Reduction. If in Closed Loop ...

• Torque Reduction

  The Torque Reduction Function is used for drag racing bikes, to allow for the control of the engines acceleration during upshift gear changes. This control is achieved through the application of fuel and/or ignition pulse cuts, and ignition timing ...

• Torque Reduction

  Torque Reduction The Torque Reduction Function is used for drag racing bikes, to allow for the control of the engines acceleration during upshift gear changes. This control is achieved through the application of fuel and/or ignition pulse cuts, and ...

• Torque Converter Pressure Sensor

  The Torque Converter Pressure Sensor is used to monitor the fluid pressure within the transmissions torque converter. It can be used with your ECU for mapping of Transmission tables, for data logging and for Engine Protection purposes. A Torque ...

• Torque Management

  The Torque Management function is designed for drag racing applications, managing engine torque in order to maintain optimal wheel speed, resulting in optimized grip, acceleration and ultimately race times. This function allows you to program a ...