Haltech | Tuning Ignition | Knowledge Base

Tuning Ignition
Applying Load
If you have access to a dynamometer, use it to apply load to the engine and increase the advance from a conservative value until peak torque is attained for every load and RPM point. Note: Avoid sustaining an engine under high load and engine speeds ...
Tuning For Idle (ignition)
Typical idle speeds usually sit between 500 RPM and 1000 RPM. In order to assist the idle control mechanism to achieve a steady engine speed, it is advisable to ensure that the ignition advance at the idle loads between 500 and 1000 RPM are similar, ...

Tuning Ignition