CAN
Haltech CAN System
Haltech CAN System This node allows any CAN Devices to be enabled and for a DTC Severity level to be set for each device. Displays If you have a Haltech CAN Supported Dash it will need to be enabled in this page by clicking the Tick box for the: ...
Vehicle CAN System
Vehicle CAN System Bus Selection OBD-II - The Haltech ECU can output OBDII data on the Vehicle CAN system. This allows most scan tools, plus third party applications such as iPhone/Android OBDII displays, to display diagnostic trouble codes and ...
CAN
CAN Wiring This nodes allows the tuner to select which CAN port is connected to the Vehicle CAN (if enabled) and the Haltech CAN Bus (if enabled). Select The CAN port being used and enable the Terminating Resistor if the ECU is the first or last ...