Fuel System
Injector Diagnostics
Injector Diagnostics Enable Injector 90% Duty Cycle Exceeded DTCs Enables the DTC flag generated when any injection output exceeds 90% duty cycle. These DTCs do not trigger a Severity Level. Enable Open Circuit DTCs Enables the DTC flag generated ...
Primary Fuel Density
Primary Fuel Density This table is used to set the density of the primary fuel used in the ECU fuel volume delivery calculations. Default = 737.2 kg/m3 (Gasoline/Petrol) The table is enabled when the Fuel Type is set to Petrol, Flex Fuel, or Ethanol ...
Fuel System
Fuel System This page is used to configure the Fuel Injection System. Injection System Disable Injectors Enabling this will disable all injector outputs. (Default = Disabled) Enable Short Pulse Width Adder Enabling this will add a Short Pulse Width ...