Cam Control
Cam Control Wiring
Connections Intake and Exhaust Cam Inputs - Select an appropriate input wire, typically either the Home or an SPI (Synchronised Pulsed Input), that will be wired to the selected cam position sensor. Each variable cam must have a position sensor so ...
Target Scalar
The Target Scalar table is used to scale and control the output of the Cam Control solenoid based on changes in coolant temperature, however the axis is user configurable to any channel.
Exhaust Cam Control
Settings Exhaust Frequency - The frequency used by the Exhaust Cam Control solenoids. Using a low frequency can give an increased usable duty range but may cause the solenoid to rattle. Using a high frequency can limit the usable duty range. Exhaust ...
Intake Cam Control
Settings Intake Frequency - The frequency used by the Intake Cam Control solenoids. Using a low frequency can give an increased usable duty range but may cause the solenoid to rattle. Using a high frequency can limit the usable duty range. Intake ...
Cam Control
The Cam Control function allows the Haltech ECU to control continuously variable cam systems on up to two intake cams and up to two exhaust cams. Variable cam control systems are typically controlled by a solenoid that regulates oil pressure into ...