Drive By Wire
Drive By Wire Wiring
Wiring Connections Throttle Motor Outputs - HBOs must be used for the throttle motor outputs. It does not matter which HBOs are paired with one another on a throttle motor. The polarity of the wires does not matter either, and motor direction is ...
Max TPS
DBW Max TPS Table This table sets the maximum position that the ECU will open the throttle to (as a percentage). Up to 4D mapping is available.
DBW Lift Rate Damping
DBW Lift Rate Damping The damping level applied to the electronic throttle while closing when engine demand is lower than 2.5%. To disable this set to zero. Maximum damping available is 10.
DBW Close Rate Damping
DBW Close Rate Damping Table The damping level applied to the electronic throttle while closing while engine demand is 2.5% or greater. To disable this set to zero. The maximum damping available is 10.
DBW Open Rate Damping
DBW Open Rate Damping Table This table sets The damping level applied to the electronic throttle when opening. This is used to soften the feel of the throttle to make it less sensitive to sudden movements, with higher numbers giving more dampening. ...
Calibration
Calibration This node sets the calibration for the DBW throttle motor, TPS (Throttle Position Sensor) and APP (Accelerator Pedal Position Sensor). APP Calibration The Accelerator Pedal Position Calibration is a process whereby the ECU can learn the ...
Drive By Wire
Drive By Wire The Drive By Wire (DBW) function allows your ECU to accept an input from an Accelerator Pedal Position (APP) sensor and use this to control the output to a DBW Throttle Body. This type of control allows mapping of the throttle body ...