Intake Air Bleed
Intake Air Bleed Wiring
This node configures the output to be used for the Intake Air Bleed. A DPO (Digital Pulsed Input) is typically used, but any available output is acceptable.
Intake Air Bleed Table
This tale sets the duty cycle you want the air bleed solenoid to act at. This controls how much the valve opens, and how much air will bleed out if there is boost pressure. The input axis can changed to any channel by pressing F3 when the table is ...
Intake Air Bleed
The Intake Air Bleed function is intended for turbo-charged drag racing applications, where an air bleed valve is located after the turbo-charger to reduce manifold pressure. This is done to reduce compressor load, allowing the turbo to spin faster ...