Oil Metering Pump
Oil Pump Wiring
Wiring Options Output Type - Select if the stepper motor has 4-wires or 6-wires. 4-wire Stepper motors will require the 4 x HBO (Half-Bridge Outputs) be used as the Oil Metering Pump outputs. Stepper Max Speed - This sets the maximum speed that the ...
Target Position
Target Position table Typically mapped over 3D with RPM and Engine Load, this table will be position of the valve from 0 to 100%. Low air flow conditions will use small values, and high airflow conditions will use large values. Up to 3D mapping is ...
Oil Metering Pump
Oil Metering Pump The Oil Metering Pump function allows for control of the stepper motor controlled oil injection system used on some Mazda Rotary engines. This provides a feedback signal to let the ECU know the position of the valve, and a stepper ...