Sequential Twin Turbo
Sequential Twin Turbo Wiring
This node allows for configuration of outputs for the Sequential Twin Turbo system. An output must be selected for the Pre-Control Valve, Exhaust Valve, Charge Relief Valve and Charge Valve. Typically a DPO (Digital Pulsed Output) is used, but any ...
Pre-Control Duty Cycle
Sequential Twin Turbo Pre-Control Duty Cycle Table This table sets the duty cycle sent to the secondary turbo pre-control valve. Up to 3D mapping is available.
Secondary Off RPM
Sequential Twin Turbo Secondary Off RPM Table This table sets the RPM at which the secondary turbo is deactivated. Up to 3D mapping is available
Secondary On RPM
Sequential Twin Turbo Secondary On RPM Table This table sets the RPM at which the secondary turbo is activated. Up to 3D mapping is available
Sequential Twin Turbo
Sequential Twin Turbo User's Guide Clicking the above link will open the guide in a new tab or if viewed from within NSP a new browser window. Sequential Twin Turbo function page The Sequential Twin Turbo function is used to control the valves that ...