Lambda Corrections
Generic Correction
The Target Lambda Generic Correction table is a user-configurable table that allows configuration to be tailored to your needs. By default, this correct table contains only one value which will create an offset of the entire Target Lambda table. This ...
Fuel Composition Correction
This table applies a correction to the target lambda based on Fuel Composition. The output of this table scales with the Fuel Composition Correction Scalar value. Eg, when the Fuel Comp Scalar is 50%, then 50% of the values in this table are applied.
Lambda Air Temp Correction
Axis selection and changing values This table is intended to be used with Inlet Air Temperature set as the first/x (left to right) axis, and Manifold Pressure as the second/y (bottom to top) axis, though both axis are user configurable to use any ECU ...
Lambda Coolant Temp Correction
Axis selection and changing values This table is intended to be used with Coolant Temperature set as the first/x (left to right) axis, and Manifold Pressure as the second/y (bottom to top) axis, though both axis are user configurable to use any ECU ...
Lambda Corrections
Various target lambda corrections can be enabled as a correction to the main Target Lambda table output. A Generic Correction and Fuel Composition Correction can be enabled from this node. Once enabled they will appear in the Lambda Corrections tree ...