Generic Output
Generic Output Wiring
Wiring Options Number of Outputs - Select the number of outputs (up to four) to be used for the Generic Output. This means that when the conditions activate the Generic Output, up to four individual output pins will be enabled/turn on. Stepper Max ...
Generic Output Table
Generic Output Table This table is only available if the Generic Output Mode is set to Table. This table will appear with the name that has been configured, and allows up to 3D mapping (16x16) of your Generic Output, and can be configured to use any ...
Condition Settings
Condition Settings This node sets the conditions (up to three) which when met will turn the Generic Output on. Conditional Settings are only available if the Output is a State output. Number of Conditions - Selects the number of channels, up to 3, ...
Generic Output
Generic Output The Generic Output function allows for a customised output to be configured in the ECU, where that output type is not directly listed in the system. Settings Name - Enter a name that is to be used for the Generic Output. This name will ...