Gear Detection
Selector Position
Selector Position The Selector Position node is only available if Selector Position Type is set to Voltage Input in the Gear Detection function This node allows for the Selector Position Sensor calibration to be created. By pressing the Calibrate ...
Gear Position
Gear Position The Gear Position node is only available if Gear Detection Type is set to Gear Position Sensor in the Gear Detection function This node allows for the Gear Position Sensor calibration to be created. By pressing the Calibrate button with ...
Gear Switch
Gear Switch The Gear Switch node is only available if Gear Detection Type is set to Gear Switch in the Gear Detection function. Gear Switch Reset Time The amount of time after the Clutch Switch has been activated before the Gear Number will reset to ...
RPM Drop
RPM Drop The RPM Drop node is only available if Gear Detection Type is set to RPM Drop in the Gear Detection function Gear Reset RPM The Engine RPM must fall below this amount to reset the gear position back to Gear 1. Gear RPM Drop Reset Time The ...
Gear Detection
Wiring Options Gear Detection Type Select the method used to detect gear position. Gear Ratio - This method requires the Gear Ratios function to be enabled and configured. Gear Switch - This method is used with a gear change switch, such as a load ...