Trans-Brake
Trans-Brake Wiring
Wiring Options Trans-Brake Control Select which mode of Trans-Brake Control is desired. Not Used - Select when the Trans-Brake is not to be used Input Only - Select when only an input is to be used for the function Input and Output - Select when both ...
Bump/Creep Duty Cycle
Bump/Creep Duty Cycle Table This table sets the Duty Cycle when the bump/creep button is pressed, with 0% meaning the trans=brake is fully off, and 100% meaning the trans-brake is fully on. Up to 3D mapping is available.
Trans-Brake
Trans-Brake The Trans-Brake function allows the ECU to control a trans-brake in an automatic transmission. The Trans-Brake allows the engine to develop full power without that power being transmitted into the drive-train. This is achieved by using a ...