Launch Control
Launch Control Wiring
Options Input Type Always On Launch Control will always be active when all conditions are met in the Launch Control Tab. Launch Switch A Launch Switch is to be wired to the Nexus VCU to enable Launch Control. Clutch Switch Allows the Launch Control ...
End RPM
The value entered determines the maximum RPM allowed while the launch control input is in an active state. An example of this is where a clutch pedal switch or transbrake is used to activate launch control. When triggered the engine will rev to a ...
Launch Control Ignition Advance
Launch Control Ignition Advance Table This table becomes the new 3D (8x8) Ignition Base table while the Launch Control is active. The numbers in this table reflect actual ignition timing, and are not a correction amount. Typical numbers would reflect ...
Fuel Correction
Launch Control Fuel Enrichment Table This table allows 3D (8x8) fuel corrections to be applied while the Launch Control is active. Often additional fuel is added to assist with turbo spool up when near to the desired RPM for launch. This is typically ...
Launch Control
The Launch Control function allows control of RPM and the power produced by the engine during the launching of the vehicle. This is done by introducing a temporary RPM Limiter, together with fuel and ignition mapping. Warning Using Launch Control on ...