Alternator Control
Alternator Control Wiring
Edit - Click to assign / reassign an available output as Alternator Control Output. Clear - Click to reset Output assignment. Active State - The logic level of the output when the it is On. Low is driven to 0v; High is pulled to the pull up voltage ...
Alternator Control Base Output
Base The amount of duty cycle required to have the Battery Voltage meet the Target Voltage. The alternator control operates in closed loop, so it is possible the actual duty being used by the Nexus R5 ECU may not match the Base Duty value. If not, ...
Alternator Control Target Voltage
TargetThe Target Voltage that you wish to have the Alternator Control aim for. Typically this will be 13.8 to 14.4V. Too low will not charge the battery, and too high can cause battery damage.
Alternator Control
Alternator Control The Alternator Control function allows for the ECU to control the charging voltage of alternator that supports this function. This is done with a duty signal that is sent to the voltage regulator to alter the charging rate. A ...