Haltech | Cam Control Tuning

Cam Control Tuning
Tuning PID Settings
Set all Proportional, Integral and Derivative to zero Bring up the Proportional in increments of 5% until you see a small oscillation in the cam timing. Note: the cam timing will not reach the target cam timing with only the Proportional part of the ...
Settings
Zero the Cam Angle Map and make sure the engine is up to operating temperatures. Enable the Cam Control Input and set up the values or use the default values as stated above. Adjust the trigger angle value until the cam angle reads 0 degrees (Make ...

Haltech | Cam Control Tuning | Knowledge Base