Haltech | Kill Switch | Knowledge Base

Kill Switch
Kill Switch Wiring
Wiring This node allows you to assign the input for the Kill Switchn. Any available AVI (Analogue Voltage Input) or SPI (Synchronised Pulsed Input) can be used. CAN Keypad buttons may also be used. Edit - Click to assign / reassign an available input ...
Kill Switch
Kill Switch General Trigger Mode - This selects the trigger mode for the Kill Switch. Wired Input - A switch is to be wired to an input to shut down the engine. Conditionally Triggered - ECU conditions are used to shut down the engine. Stop ...

Kill Switch