CAN Bus Overview

CAN Bus Overview

The Haltech Elite 2500 ECU has Dual CAN Bus communications capable of communicating directly to the Haltech Bus and the Vehicle Bus and can be enabled and configured via the Devices tab within the setup page.

    • Related Articles

    • REM Overview

      The Race Expansion Module (REM) is used in conjunction with the Haltech Elite 2500 ECU to offer extra Input and Output functionally as well as advanced traction control and other advanced functions. Using the REM with the Elite 2500 allows sequential ...
    • Vehicle Can Bus Selection

      The Haltech Vehicle CAN is used to support vehicles which incorporate a vehicle CAN Bus. The Vehicle CAN Bus from the Haltech broadcasts messages required for the selected vehicle to interact with OEM modules and OEM Dashes. Select from the dropdown ...
    • Elite VMS / VMS T Overview

      The Haltech Vehicle Management System (VMS) is an ignition only ECU that is targeted at mechanically injected and carburetor drag racing vehicles. The VMS is a 1 stop, 1 cable solution for ignition timing control (8 channel), boost control, nitrous ...
    • Haltech Can Bus Selection

      The Haltech CAN Bus is used to communicate with all Haltech CAN based expansion devices such as wideband controllers, display dashes and I/O expander boxes. Select the port where you would like the Bus to be broadcast.
    • Auxiliary CAN Bus Port

      The Auxiliary CAN Bus Port is designed to be used with a standard Deutsch DTM Series 4 pin connector. This port can be setup to broadcast Haltech CAN data or Vehicle Bus data. Pre-Terminated cables can be purchased to connect to the CAN Bus Port. ...