Related Articles
Auxiliary USB Port
The Auxiliary USB Port (type A) is reserved for future expansion.
FG MkI Radio Reprogramming
Using the supplied Elite Pro Plug-in DTM4 CAN to OBDII Radio Reprogramming Cable (HT-135001), a once off reprogramming of the radio module in Ford Falcon FG MkI Models (2008-2011) can be performed to re-enable full functionality when the OEM ECU is ...
Initial ECU Setup
Your Elite Pro Plug-in Series ECU has been shipped in a default state. It will NOT start your vehicle without ESP configuration. Please follow the steps below to ensure you upload the correct map, set your vehicle variant and calibrate your ...
Auxiliary CAN Bus Port
The Auxiliary CAN Bus Port is designed to be used with a standard Deutsch DTM Series 4 pin connector. This port can be setup to broadcast Haltech CAN data or Vehicle Bus data. Pre-Terminated cables can be purchased to connect to the CAN Bus Port. ...
Check Power and GND and Communications
Leaving your ignition modules and injectors disconnected, power up the ECU by turning on the vehicle's Ignition power. Check that the ECU is powered up and that you are able to communicate with the ECU using a laptop running Elite Software ...