Reverse Lights Wiring

Wiring

Reverse Light Output

      This node allows you to assign the output for reverse lights.

            Edit - Click to assign/reassign an available output as Reverse Light Output.

            Clear - Click to reset Output assignment.

• Related Articles

• Reverse Switch

  The reverse switch is used to determine when the vehicle is in reverse gear. Options Reverse Switch Input Mode - Select an appropriate input to use for the Reverse Switch Input. Select from either a digital switched input, or vehicle CAN input. ...

• Reverse Lights

  Reverse Lights When enabled, allows control of reverse vehicle lights. NOTE: This output requires some form of input or Gear Detection in order for the VCU to determine when to enable. This can be a wired AVI Input, a CAN based input, or Transmission ...

• Brake Lights

  Brake Lights When enabled, this function will allow control of vehicle brake lights.       NOTE: Requires use of a brake pedal switch, set up through the "Sensors" navigation node.       Brake Light Pulsing (Requires Brake Pressure Sensor)       ...

• Reverse Switch

  The reverse switch is used to determine when the vehicle is in reverse gear . Wiring Tab Connections Reverse Switch Input Connection Type SPI/DPI Edge Select Sensor Type Pullup AVI Switch On Voltage Switch Off Voltage Example 1 Example 2 Wiring Tab ...

• Neutral Switch

  The neutral switch prevents a vehicle from starting when in any gear position other than Park or Neutral. The switch can also monitor gear selection and reverse light feedback data. ​ Options Neutral Switch Input Mode - Select an appropriate input to ...