Wiring Diagrams
Nitrous Relay Wiring (Multistage)
Fuseblock Assembly
The fuse block assembly holds the fuses that protect the various components of the Engine Management System. The fuse block is supplied from the factory with fuses installed. The fuse ratings and connections are shown in the wiring diagram above, and ...
Fuel Pump (Wiring)
The Orange/Blue wire is used to operate the fuel pump. When the Haltech ECU wants to operate the fuel pump it will close the fuel pump relay, which will supply the fuel pump with 12V from the Battery. It is important that the fuel pump is capable of ...
Drive By Wire Throttle Wiring
Drive by wire technology is supported by the Elite 2500 ECU's and requires wiring of an Electronic Throttle and Accelerator Pedal Position sensor. Wiring setup and connection allocation can be found within the function in the setup page. This wiring ...
CO2 Boost Control Wiring
Wire Colour Legend
B=Black BR=Brown G=Green GY=Grey L=Blue O=Orange P=Pink R=Red V=Violet Y=Yellow W=White (SHD) = Shielded Cable When two Colours are used in a wire by the alphabetical code, the first letter indicates the basic wire colour, the second colour indicates ...