Toyota
2RZ/3RZFE Trigger Information
Sensor Information Crank/Cam Sensor Waste-spark coilpack variants of this engine use a Crank Position Sensor in the block, and a Cam Position Sensor in the head. Distributor models do not have a cam sensor in the head - however some have the cam ...
2JZ VVT-i Trigger Information
Sensor Information Crank/Cam Sensor The turbo models of this engine all use a Crank Position Sensor and a Cam Position Sensor. Some aspirated models use a Distributor instead of a crank and cam sensor. Crank Sensor Crank sensor models of the 2JZ ...
2JZ Non VVT-i Trigger Information
Sensor Information Crank/Cam Sensor The turbo models of this engine all use a Crank Position Sensor and a Cam Position Sensor. Some aspirated models use a Distributor instead of a crank and cam sensor. Crank Sensor Crank sensor models of the 2JZ ...
2AZ-FE Engine
Information on the Toyota 2AZ-FE 2.4L engine Haltech ECU Options The Elite 1500 or 2500 are suitable for this engine General Information Cylinders 4 Displacement 1AZ 1998cc 2AZ 2362cc Firing Order 1,3,4,2 CAN This vehicles uses CAN bus for various ...
Toyota 1FZ-FE Engine
Information on the Toyota 1FZ-FE engine. The 1FZ-F is a carburettor version and is not covered in this guide. 80-Series 1FZ-FE with Distributor ignition 100-series 1FZ-FE with Waste Spark ignition and crank/cam sensors Haltech ECU Options Engine is ...
1NZ-FE Engine
Information on the Toyota 1NZ-FE and 2NZ-FE engine. It does not cover the hybrid or Atkinson cycle variants. General Information Cylinders 4 Displacement 1NZ 1497cc 2NZ 1299cc Firing Order 1,3,4,2 CAN These vehicles use CAN bus for various devices ...
2ZZ-GE Engine
Information on the Toyota 2ZZ-GE engine General Information Cylinders 4 Displacement 1795 cc / 109.6 ci Firing Order 1,3,4,2 The 2ZZ-GE engine is a high performance development based on the economy-biased 1ZZ-GE. Compression was raised from 10.0:1 ...
1UZ-FE Engine
Information on the Toyota 1UZ-FE Engine Haltech ECU Options All Haltech ECU models can run the engine. Elite 1000 and higher is required to control the factory stepper motor idle valve. Elite 950, 2000, and 2500 are required for sequential ...
2JZ / 1JZ Engine
Information on the Toyota 2JZ-GTE, 2JZ-GE, 1JZ-GTE engine Haltech ECU Options Haltech ECUs do not support the ETCS-i throttle Recommended Haltech ECU Models Haltech ECU Model Support Level Elite 750 Sequential Fuel and Ignition, VVTi, OEM Stepper ...
3SG Engine
Information on the Toyota 3SGE and 3SGTE engines Toyota MR2 3SGTE engine The Toyota 3SGE BEAMS engine General Information Cylinders 4 Displacement 1998cc Firing Order 1,3,4,2 Cylinder Orientation (from drivers seat) Cyl1 closest to timing belt Model ...
4AG Engine
The Toyota 4AG DOHC 16V engine General Information Cylinders 4 Displacement 1587cc Firing Order 1342 Cylinder Orientation (from drivers seat) Cyl1 closest to timing belt Model Variants 4AGE 1st gen Blue Early Big Port - USDM Vane MAF, JDM MAP, ...