Headlights Wiring

Wiring

Headlight Input

      This node allows you to assign the input for the headlamps.

            Edit - Click to assign/reassign an available input as Headlight Input.

            Clear - Click to reset Input assignment.

High Beam Input

      This node allows you to assign the input for high beam headlamps. (Only available when High Beam is enabled under Headlight setup).

            Edit - Click to assign/reassign an available input as High Beam Input.

            Clear - Click to reset Input assignment.

High Beam Flash Input

      This node allows you to assign the input for high beam "flash to pass" function. (Only available when High Beam Flash is enabled under Headlight setup).

            Edit - Click to assign/reassign an available input as High Beam Flash Input.

            Clear - Click to reset input assignment.

Headlight Output

      This node allows you to assign the output for headlamps.

            Edit - Click to assign/reassign an available output as Starter Motor Relay Output.

            Clear - Click to reset Output assignment.

Parklight Output

      This node allows you to assign the output for the parking lights.

            Edit - Click to assign/reassign an available output as Parklight Output.

            Clear - Click to reset Output assignment.

High Beam Output

      This node allows you to assign the output for the high beam headlamps.

            Edit - Click to assign/reassign an available output as High Beam Output.

            Clear - Click to reset Output assignment.

• Related Articles

• Headlights

  Headlights The Headlights function allows for the Nexus R5 ECU to control the illumination of automotive headlamps.        Inputs             None/Always On: Lights come with ignition input.              1 Input: For cycling between "Off", "Parking ...

• Start Motor Wiring

  Wiring This node allows you to assign the output for the Starter Motor Relay. NOTE: Starter Motors draw extremely large amounts of current and thus MUST be wired via a Starter Motor Solenoid. Starter Motor solenoids also draw large amounts of current ...

• Stop Start Button Wiring

  Wiring This node allows you to assign the input for the Start/Stop Button. Any available AVI (Analogue Voltage Input) or SPI (Synchronised Pulsed Input) can be used. CAN Keypad buttons may also be used. Edit - Click to assign / reassign an available ...

• Electrical

  This page controls the engine startup and shutdown features such as Ignition switch, Engine Control Relay, Starter Motor Relay, as well as vehicle lights control. Function names can be clicked on to navigate to that function's relevant tree node. Any ...

• Electrical Load Switch

  The Electrical Load Switch is used to determine when there is a significant electrical load on the charging system. This switch can be used as an idle up condition to help stabilise the idle rpm due to load on the alternator. This switch source is ...